Fully-Automatic Glass Bottle Hot Mango Juice Filling Machine One
The machine is for filling green tea,black tea and fruit juice
drink and integrates washing,filling and capping together ,and
adopts block bottle-neck hanging work state design and filling
valve rise-drop design.
It can meet the requirements of hot filling of below 95 degrees
Celsius. It adopts man-machine interface touch
a. Rinsing Part
1. It is rotary type, mainly sued for rinsing glass bottles send
the bottles to the filling machine. It can be applied for alcohol,
beverage, and water bottle rinsing.
2. Glass bottle enters the machine by bottle distributing screw,
and turned with mouth down by clip and turn mechanism, after
aseptic water rinsing and drying, automatically turn with mouth up,
and send to filling machine by bottle-outlet star-wheel. The main
structure with rinsing water and outer shield are all stainless
steel material; open type gear drive.
3. Renew stainless steel clip, simple structure, convenient
adjustment; small area touch with bottle mouth, avoid the secondary
pollution for the bottle mouth efficiently.
4. Open-type gear drive.
5. Automatically adjustable lifting to suit bottles of different
6. Bottle rinsing machine inlet pipe equipped with pressure gauge
and stability valve.
7. Bottle rinsing machine equipped with water collector to callback
8. The consumptions of the water for each type of bottle when
rinsing is 105ml/s (when 0.25Mpa)
b. Filling Part
1. We introduce into Germany technology for the filling machine,
and design & manufacture by ourselves with hot filling
2. Filling valve adopts constant pressure mechanism valve, for
normal temperature or high temperature filling, filling fast and
high accuracy of filling liquid level. It is adopted double guide
3. With complete CIP cleaning function.
4. With function of beverage inlet and beverage recycle automatic
control, ensure material level in filling tank, small temperature
5. The main drive adopts gear drive, with high efficiency, low
noise, long life, easy maintenance, sufficient lubrication, grease
can lubricate centralizing automatically, adopts transducer to the
speed of main motor to control, the machine adopts step-less
frequency conversion timing. The material for the whole platform
and frame is carbon steel with stainless steel outside.
6. The machine is automatically controlled by PLC, fault on line
display, like bottle block, cap shortage etc.
7. The key parts and electric elements of the machine are adopt
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
IF you want to the detailed quotation,please leave me these message
1, bottle vlolume
2, bottle materail (machines for glass bottle and plastic bottle
3, how many bottles per hour you want to produce ?
4, do you need this water filling machines only or whole water
|Bottle Height||150-310 mm|
|Cap Size||28mm and 30mm PE Standard Caps|
|Air Consumption||500 L/min|
|Gas Consumption||0.4 m3/min|